WeldForge Pro™

Professional Plastic Welding System

★★★★★ 4.9 (147 reviews) ☑ Verified
Did You Know Every "plastic repair" glue you've tried bonds the surface only — it never reinforces the structure. That's why it always cracks again. Body shops use hot staple fusion to weld metal reinforcement inside the plastic. Now you have the same tool.
⚡
50W Body Shop Power
Same wattage pros use daily
🔩
Structural Metal Fusion
Stronger than the original plastic
🧰
Complete Staple Kit
4 staple types for every crack pattern

WeldForge Pro™ Professional Plastic Welding System

$49.99
$49.99 $69.99
SAVE 28% Sold out
  • American Express
  • Diners Club
  • Discover
  • JCB
  • Maestro
  • Mastercard
  • Visa
View full details
The Plastic Repair Problem

Cracked Bumper?
You've Got Two Bad Options.

Until now, you either overpaid the body shop or used glue that fails in weeks.

Your Current Options
Expensive, temporary, or both
Body shop quotes $500-$1,500 — for a crack they fix in 20 minutes with a $40 tool.
JB Weld / Gorilla Glue — surface bond only. Cracks again in 2-4 weeks under vibration.
Zip ties & duct tape — holds it together but looks terrible. Zero structural repair.
Cheap Amazon welders — 20W elements that burn out after one use. Misleading reviews.
Full part replacement — $200-$600 for a new panel when only a 4-inch crack needs fixing.
WeldForge Pro
The body shop fix. In your garage.
  • 🔩 Metal staples fuse INSIDE the plastic — permanent structural bond
  • ⚡ 50W pro-grade power — welds in seconds, not minutes
  • 🧰 4 staple types included — every crack pattern covered
  • 💪 Repair point stronger than original uncracked plastic
  • 💰 One $40 tool replaces unlimited body shop visits
Before and after plastic repair comparison

Body shop charged me $1,200 to fix a bumper crack. When I picked up the car, I could see they just glued it and painted over it. I paid $1,200 for fancy glue.

Professional Repair Made Simple

Fixed in
3 Simple Steps

No training. No certification. No experience needed. If you can use a hot glue gun, you can weld plastic.

WeldForge Pro welding a cracked bumper
📎
1

Load a Staple

Choose the right staple shape for your crack — flat for straight runs, wave for curves, V for corners. Slide it between the dual brass electrodes.

🔥
2

Press & Fuse

Hold the trigger, press the heated staple into the cracked plastic. The staple melts into the material, fusing with the surrounding plastic in seconds.

✅
3

Done. Permanently.

The metal staple is now a permanent internal skeleton inside the plastic. Sand smooth if you want a cosmetic finish, or leave it — the structural repair is complete.

What You Get

Everything You Need.
Nothing You Don't.

Complete Kit
WeldForge Pro complete kit contents flat lay

Inside Every WeldForge Pro

A complete plastic welding system ready to use out of the box — no extra purchases, no missing parts, no "accessories sold separately."

⚡

50W Pro-Grade Welding Gun

Dual brass electrodes deliver body shop-grade heat. Compact pistol grip at just 1 lb for one-handed operation in tight spaces.

🗂️

4-Type Organized Staple Kit

Flat, wave, V, and M-staples in a sorted compartment case. Every crack pattern covered — straight lines, curves, corners, and wide reinforcement.

🔌

Standard 110V Plug & Play

Standard US outlet. No compressor, no gas, no special power requirements. Plug in and start welding.

🛡️

Universal Plastic Compatibility

Works on ABS, polypropylene, polyethylene, and nylon — covering 95%+ of all automotive and household plastics.

Garage-Tested, Shop-Approved

What People Are Saying

★★★★★

4.9 out of 5 based on 147 verified reviews

★★★★★
Saved me $800 on my first repair
Wife backed into a post, cracked the whole bumper lip. Body shop wanted $850. I bought this, watched one YouTube video, and fixed it in my driveway in 25 minutes. The weld is solid — I pushed on it, flexed it, tried to crack it. Held perfectly. I almost feel guilty for how easy it was.
MR
Mike R.
Verified Purchase
★★★★★
I'm a mechanic. This is what we use.
I run a small shop and I've been using hot staple welders for years. This one does the exact same job as my $400 station for bumper cracks, broken tabs, and headlight housings. I bought 3 more for my guys to keep in their toolboxes for mobile jobs. At this price, it's a no-brainer.
DT
Derek T.
Verified Purchase
★★★★★
JB Weld failed 3 times. This held.
Cracked radiator overflow tank. Tried JB Weld twice, epoxy once — all three cracked again within a month. Used this welder with two wave staples, and it's been 4 months of daily driving, zero issues. The weld is literally stronger than the rest of the tank. Should've bought this first.
JC
Jason C.
Verified Purchase